SFP-Ge-Sx-mm 850nm 1000base-Sx SFP for Cisco, Huawei Compatible

J4848C
1.25Gb/s Short-Wavelength SFP Transceiver 
With  DDMAPPLICATIONS1.25Gb/s 1000Base-SX Ethernet Links
1x Fiber Channel
High speed I/O for file servers
Switch to Switch interface
Distributed multi-processing
Channel extender, Data storage


 PRODUCT FEATURESCompliant with specifications for SFP MSA standard
 Compliant with specifications for IEEE-802.3z Gigabit Ethernet Standard
 Compliant with specifications for SDH/SONET/ATM standard
 Duplex LC Connector
 850nm Oxide VCSEL laser transmitter
 Differential LVPECL inputs and outputs
 TTL signal detect indicator
 Up to 1.25Gb/s bi-directional data links
 Single Power Supply 3.3V
 Hot-Pluggable SFP footprint
 Up to 500m on 50/125μm MMF, 300m on 62.5/125μm MMF
 Metal enclosure for lower EMI
 Extended operation temperature range: 0ºC to +70ºC


The transceiver is a duplex LC connector transceiver, designed for use in 1x FC and Gigabit Ethernet and to provide a IEEE-802.3z compliant link at 1.25Gbps applications. The transceiver are hot-pluggable, the characterization is performed in accordance with Bellcore specification TA-NWT-000983. All of them are housed in a stainless package and the combination produces a component of high reliability.

100% STRICT PERFORMANCE TESTING 


 Absolute Maximum RatingsOperation Environment Electrical Characteristics
Transmitter Optical Characteristics:
(Ambient Operating Temperature Ta=-10°C to +70°C, Vcc = 3.0V to 3.6V)
Receiver Optical Characteristics:
(Ambient Operating Temperature Ta=-10°C to +70°C, Vcc = 3.0V to 3.6V) Timing Characteristics
General Specifications

Digital Diagnostic Functions (DDM)
Plexda's GLC-SX-MM SFP transceiver support the 2-wire serial communication protocol as defined in ther SFP MSA. It is very closely related to the EEPROM defined in the GBIC standard, with the same electrical specifications.

The standard SFP serial ID provides access to identification information that describes the transceiver's capabilities, standard interfaces, manufacturer, and other information.
Additionally, The SFP transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.

The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). the digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The interface is identical to, and is thus fully back ward compatible with both the GBIC specification and the FP Multi-source Agreement.
The operating and diagnostics information is monitored and reported by a digital diagnostics transceiver controller (DDTC) inside the transceiver, which is accessed through a 2 -wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the EEPROM that are not write-protected. The negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def2) is bi-directional for serial data transfer. The host uses DA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation.


COMPTIBILITY TEST




FULL COMPATIBLE WITH FOLLOWING NETWORK DEVICES




APPLICATION FOR CISCO WS-C4507R and WS-C3750G SWITCH 








Get more information, please contact to us
welcome to visting our website plexda.en.made-in-china.com!